HP StorageWorks SAN Virtualization Services Platform Data Path Module User Guide (5697-0772, November 2010)

2 Using the command line interface
This chapter describes the use of the HP StorageWorks SAN Virtualization Services Platform Data
Path Module (DPM) command line interface (CLI). You can configure and manage the DPM with these
common command sets that provide the same functions as the DPM GUI.
CLI overview
The DPM provides a command line user interface through serial, telnet, and ssh connections with
serial being the preferred default. All configuration, maintenance, and monitoring of the DPM is
performed through the CLI.
Command quick reference by object
Table 1 shows which commands are available for the major object types.
Table 1 Commands by object type
PageCommandObject type
22Disable eth command
eths
27Enable eth command
36Modify eth command
47Set eth command
54Show eth command
55Show eths command
24Disable port command
ports
29Enable port command
38Modify port command
39Modify ports command
44Reset port command
59Show port command
60Show ports command
19Create user command
users 22Delete user command
26Disable user command
HP StorageWorks SAN Virtualization Services Platform Data Path Module User Guide 11