HP StorageWorks SAN Virtualization Services Platform Data Path Module User Guide (5697-0772, November 2010)

Keyword values
[permission]
Either read, write, or all.
See also
“Enable insecure command” on page 28
“Show security command” on page 62
Disable ntp command
Disables use of the ntp protocol on the DPM.
Syntax
disable ntp
See also
“Enable ntp command” on page 29
“Modify ntp command” on page 38
“Restart ntp command” on page 45
“Show ntp command” on page 59
Disable port command
Disables the specified Fibre Channel port number so that it cannot send and receive Fibre Channel
traffic.
Syntax
disable port
[port number]
*
Keyword values
[port number]
Port number is an integer 0–15 to indicate the DPM Fibre Channel port to be disabled.
* indicates all Fibre Channel ports.
See also
“Enable port command” on page 29
“Modify port command” on page 38
“Modify ports command” on page 39
CLI commands24