HP StorageWorks SAN Virtualization Services Platform Data Path Module User Guide (5697-0772, November 2010)

“Show port command” on page 59
“Show ports command” on page 60
Disable secure command (obsolete)
NOTE:
This command is obsolete and has been removed from the current version of the CLI.
Disables permissions on SSL-encrypted transmissions.
Syntax
disable secure [permission]
Keyword values
[permission]
Either read, write, or all.
See also
“Enable secure command” on page 30
“Show security command” on page 62
Disable snmp command
Disables the specified Simple Network Management Protocol component. By default, the system runs
SNMP version 2. Disabling v3 means that SNMP v3 is turned off, but does not affect SNMP v2.
Syntax
disable snmp [component]
Keyword values
[component]
Either v2, v3, or daemon. Disabling the daemon disables SNMP.
See also
“Create snmp command” on page 19
“Delete snmp command” on page 21
“Enable snmp command” on page 30
“Modify snmp command” on page 40
“Show snmp command” on page 62
HP StorageWorks SAN Virtualization Services Platform Data Path Module User Guide 25