HP StorageWorks SAN Virtualization Services Platform Data Path Module User Guide (5697-0772, November 2010)
Syntax
enable insecure [permission]
Keyword values
[permission]
Either read, write, or all.
See also
“Disable insecure command” on page 23
“Show security command” on page 62
Enable ntp command
Enables use of the ntp protocol on the DPM.
Syntax
enable ntp
See also
“Disable ntp command” on page 24
“Modify ntp command” on page 38
“Restart ntp command” on page 45
“Show ntp command” on page 59
Enable port command
Enables the specified Fibre Channel port number so that it can send and receive Fibre Channel traffic.
Syntax
enable port
[port number]
*
Keyword values
port number
Port number is an integer 0–15 to indicate the DPM Fibre Channel port to be enabled.
* indicates all Fibre Channel ports.
See also
“Disable port command” on page 24
HP StorageWorks SAN Virtualization Services Platform Data Path Module User Guide 29