HP StorageWorks SAN Virtualization Services Platform Data Path Module User Guide (5697-0772, November 2010)

“Save debug command” on page 46
“Show debug command” on page 51
“Watch debug command” on page 67
Load factory command
Restore the factory defaults (original values for rank and WWNN).
Syntax
load factory defaults
See also
“Modify factory command” on page 37
“Show factory command” on page 55
Modify chassis command
Allows the user to set values for the DPM's name, location, WWNN, maxframesize, and rank values.
Syntax
modify chassis location [location]
modify chassis maxframesize [maxframesize]
modify chassis name [new-name]
modify chassis rank [new-rank]
modify chassis wwnn [new-wwnn]
Keyword values
[location]
An arbitrary location code provided by the administrator.
[maxframesize]
Maximum size of a Fibre Channel frame that can be sent or received by this DPM. Typically 2 k,
should be set to the smallest frame size of any connected device.
[new-name]
Host name for this DPM.
[new-rank]
Controller rank for this DPM, such as “Primary” or “Secondary.”
[new-wwnn]
The Fibre Channel world wide node name for this DPM.
HP StorageWorks SAN Virtualization Services Platform Data Path Module User Guide 35