HP StorageWorks SAN Virtualization Services Platform Data Path Module User Guide (5697-0772, November 2010)
Modify ntp command
Change the NTP server.
Syntax
modify ntp server [server-name]
Keyword values
[server-name]
New server to be used to get the time.
See also
“Disable ntp command” on page 24
“Enable ntp command” on page 29
“Restart ntp command” on page 45
“Show ntp command” on page 59
Modify port command
Changes the specified options—type, capability, speed—for the specified Fibre Channel port number.
Syntax
modify port [port number]
capability [port capability]
speed [port speed]
type [port type]
Keyword values
At least one of the optional keywords is required:
[port number]
An integer 0–15 to indicate the DPM Fibre Channel port.
capability [port capability]
FCP_TARGET: to enable the port to be used as a front-end (looks like a storage array port to
servers).
FCP_INITIATOR: to initiate back-end traffic to the supported storage arrays (is not available
to servers).
both: traffic can go both ways.
speed [port speed]
1G, 2G, 4G, NEGOTIATE
CLI commands38