HP StorageWorks SAN Virtualization Services Platform Data Path Module User Guide (5697-0772, November 2010)
Restart ntp command
Stops and then restarts the ntp service.
Syntax
restart ntp
See also
“Disable ntp command” on page 24
“Enable ntp command” on page 29
“Modify ntp command” on page 38
“Show ntp command” on page 59
Restart snmp command
Stops and then restarts the Simple Network Management Protocol.
Syntax
restart snmp
See also
“Create snmp command” on page 19
“Delete snmp command” on page 21
“Disable snmp command” on page 25
“Enable snmp command” on page 30
“Modify snmp command” on page 40
“Show snmp command” on page 62
Restart ssh command
Stops and then restarts the ssh service.
Syntax
restart ssh
See also
“Disable ssh command” on page 26
“Enable ssh command” on page 31
“Show ssh command” on page 63
HP StorageWorks SAN Virtualization Services Platform Data Path Module User Guide 45