HP StorageWorks SAN Virtualization Services Platform Data Path Module User Guide (5697-0772, November 2010)
Syntax
set eth [interface name] link [auto | duplex <duplex value> | speed <link
speed>]
or
set eth [interface name] [family] [method]
Keywords and values
Description of keywords:
[interface name]
Ethernet interface that you are changing: MGMT, GE1, GE2, or GE3.
link [auto]
Auto negotiate duplex and link speed
link [duplex <duplex value>]
Full or half
link [speed <link speed>]
10, 100, or 1000.
family
IPv4, IPv6
method
Address resolution method—auto or manual
See also
“Disable eth command” on page 22
“Enable eth command” on page 27
“Modify eth command” on page 36
“Show eth command” on page 54
“Show eths command” on page 55
Show bootset command
Displays the platform, version, status, checksum, and active status of the bootset specified.
Syntax
show bootset [number]
Keyword values
[number]
Number of the bootset (1 or 2).
CLI commands48