HP StorageWorks SAN Virtualization Services Platform Data Path Module User Guide (5697-0772, November 2010)

[modules]
Provides a list of the loaded kernel modules.
[ppeinfo]
Shows firmware status.
[pscs]
Provides a list of the physical storage containers (PSCs) registered by the application.
[pscstats]
Provides statistics for each PSC registered by the application, such as total reads and writes issued
on the PSC by the DPM software.
[scsi]
Provides information about all SCSI devices (Fibre Channel LUNs) visible to the DPM.
[shimstate]
Shows diagnostic information related to the storage application software component.
[top]
Shows CPU activity by task.
[wwn]
Shows the list of World Wide Names for the DPM ports.
NOTE:
Port 0 in the list corresponds with the physical port labeled Port 1.
[wwnmap]
Provides local port display of World Wide Name and port capabilities.
[wwpn]
Provides a list of World Wide Port Names discovered on each of the DPM ports.
NOTE:
Port 0 in the list corresponds with the physical port labeled Port 1.
modules [optional-module-name]
Without this entry, all of the module names are displayed. Each module name will also have its debug
level displayed, along with the debug level for any types that are different. The rest of the available
type data will be included within parentheses on the display line. See “Set debug command” on page
46 for information on setting debug levels.
sac [sac-command]
Command that is sent to the sac in order to extract sac data. Show debug sac will return a list of
available sac commands. Show debug sac status returns the status of the sac.
HP StorageWorks SAN Virtualization Services Platform Data Path Module User Guide 53