HP StorageWorks SAN Virtualization Services Platform Manager command line interface user guide (AG781-96016, March 2009)

The Interval argument is optional, and represents the time between the creation of PiTs in minutes.
If omitted, the default value is 30 minutes. The maximum interval is 24 hours or 1440 minutes.
The Keep argument is optional and represents the number of PiTs to be tracked. If omitted, the default
value keeps 1 as the last PiT.
User PiTs are automatically deleted by the system, and cannot be purged by a script command.
The -UserPitOnly argument determines if the mode of application for this group is “UserPiT only,”
and by default is set to 0.
Avoid using the same name for MirrorGroupName and MirrorTaskName.
NOTE:
The number of source virtual disks (-VirtualDisk argument) must be the same as the number of
virtual disks in the source virtual disk group. Keep the same order as the virtual disks appear in the
virtual disk group's virtual disk list.
The Priority argument has no significance, and should be treated as optional.
DeleteLocalAsyncMirrorGroup command
Syntax
DeleteLocalAsyncMirrorGroup -Group AsyncMirrorGroupName_1 ~
[-Group AsyncMirrorGroupName_2, . . . , ] ~
-timeout 900
Description
Deletes local asynchronous mirror groups. Local means the source virtual disk is in the local (current)
SVSP domain.
DeleteRemoteAsyncMirrorGroup command
Syntax
DeleteRemoteAsyncMirrorGroup -Group AsyncMirrorGroupName_1 ~
[-Group AsyncMirrorGroupName_2, . . . , ] ~
-timeout 900
Description
Deletes remote asynchronous mirror groups. Remote means the source virtual disk is in a remote SVSP
domain.
NOTE:
If a failure occurs for any group on the list, the command stops executing and does not process the
remaining list.
Using the VSM command line interface56