HP StorageWorks SAN Virtualization Services Platform 3.0 Virtualization Services Manager Demo Mode user guide (5697-0298, January 2010)

2 Installing the HP VSM Demo Mode
program
The install process includes three easy steps:
• Downloading or copying the Demo Mode installer program to the local hard disk of the target
computer
• Running the installation program
• Verifying the configuration
NOTE:
• The target computer is the computer on which you install VSM in Demo Mode.
• The VSM Demo Mode program is certified for use on computers that run Windows XP or Windows
Vista, or servers running Windows 2008. Installing the software requires 400 MB of free disk
space. If you do not keep the compressed and uncompressed archive files on your computer, only
130 MB is required after installation.
Installing the VSM Demo Mode program
1. Download or copy the Demo Mode installer program to the local hard disk on the target computer.
The archive files are normally compressed as a .zip file.
NOTE:
A copy of the Demo Mode program and this guide are contained on the SVSP Documentation
CD that is part of the SVSP media kit.
2. After the copy or download is complete, uncompress the archive file, and run the Setup program
as described in the next section.
HP StorageWorks SAN Virtualization Services Platform 3.0 Virtualization Services Manager Demo
Mode user guide 9