HP StorageWorks Virtualization Services Manager v2 server user guide (5697-0137, September 2009)

StatusDescriptionItem
Green = Normal
Off = One or more of the following conditions exists:
• AC power unavailable
• Power supply failed
• Power supply in standby mode
• Power supply exceeded current limit
Power supply 2 LED
10
Green = Normal
Off = One or more of the following conditions exists:
• AC power unavailable
• Power supply failed
• Power supply in standby mode
• Power supply exceeded current limit
Power supply 1 LED
11
Table 5 Post LED states for 4Gb HBAs
ActivityAmber LEDGreen LEDYellow LED
Power offOffOffOff
Power on before or after firmware installa-
tion
OnOnOn
Power on after firmware initializationFlashingFlashingFlashing
Firmware fault
Alternatively flash-
ing
Alternatively flash-
ing
Alternatively flash-
ing
Activity at 1 Gb/sFlashingOffOff
Activity at 2 Gb/sOffFlashingOff
Activity at 4 Gb/sOffOffFlashing
BeaconFlashingOffFlashing
HP Systems Insight Display LEDs
The HP Systems Insight Display LEDs represent the system board layout. The display provides status
for all internal LEDs and enables diagnosis with the access panel installed.
To view the LEDs, access the HP Systems Insight Display (see “Access the HP Systems Insight
Display” on page 18).
HP StorageWorks Virtualization Services Manager v2 server user guide 11