HP StorageWorks Virtualization Services Manager v2 server user guide (5697-0137, September 2009)

Possible problems:
• Improperly seated or faulty internal component
• Faulty KVM device
• Faulty video device
Refer toItem
"POST error messages and beep codes (see page 50)"1
"Video problems" in the HP ProLiant Servers Troubleshooting Guide located on the HP
website (http://www.hp.com/support)
2
KVM or iLO 2 documentation3
"Loose connections (see page 43)"4
"Symptom information (see page 42)"5
Server maintenance and service guide, located on the HP website (http://www.hp.com/
products/servers/platforms)
6
"Port 85 and iLO messages" in the HP ProLiant Servers Troubleshooting Guide located
on the HP website (http://www.hp.com/support)
7
"General memory problems are occurring" in the HP ProLiant Servers Troubleshooting
Guide located on the HP website (http://www.hp.com/support)
8
• "Hardware problems" in the HP ProLiant Servers Troubleshooting Guide located on
the HP website (http://www.hp.com/support)
• Server maintenance and service guide, located on the HP website (http://
www.hp.com/products/servers/platforms)
9
• "Server information you need" in the HP ProLiant Servers Troubleshooting Guide
located on the HP website (http://www.hp.com/support)
• "Operating system information you need" in the HP ProLiant Servers Troubleshooting
Guide located on the HP website (http://www.hp.com/support)
10
HP StorageWorks Virtualization Services Manager v2 server user guide 47