HP StorageWorks SAN Virtualization Services Platform 3.0.1 Release Notes (5697 - 0405, May 2010)

The CreateSnapcloneGroupEx command fails with HP-UX if the group is still building
The CreateSnapcloneGroupEx command should run the first time. However, with HP-UX, if the
command is run again while the snapclone operation is still building the copy, the command fails.
You should increase the timeout argument to as long as you believe the building operation should
last. HP is working to resolve this issue.
The CreateSnapshotWithLun command fails to get last PiT instance for Pit26 with HP-UX
In HP-UX, use the SetUDHVirtualDiskLun command to change the snapshot LUN number. HP is
working to resolve this issue.
Do not use DeleteVirtualDisk command with LastInstance argument in HP-UX
In HP-UX, the use of the LastInstance argument with the DeleteVirtualDisk command is not
supported at this time. HP is working to resolve this issue.
Error with DeleteVirtualDisk command when virtual disk LUN number is out of range
When deleting a virtual disk with the DeleteVirtualDisk command, and the LUN number is out
of range, you will receive a SCSI I/O error message. This is expected behavior.
The CreateAsyncMirrorGroupEx command cannot be run in Linux
At this time, the CreateAsyncMirrorGroupEx command cannot be run in Linux. HP is working to
resolve this issue.
24