HP StorageWorks SAN Virtualization Services Platform Administrator Guide (5697-0934, May 2011)
The following is a brief description of these files and utilities:
• To install the SVSP software onto the VSM server, select Install SVSP Software. This is primarily
done by HP Services when setting up the SVSP environment.
• To adjust the HBA I/O throttling, select Set Parameters to VSM HBAs.
• If you are using the SMI-S client, you can select VSM WSRM configuration files to use the
Windows System Resource Manager to limit the CPU and memory used by the SMI-S provider.
That will allow enough resources for normal VSM activities to be maintained.
• To locate the DPM software image file, click the hyperlink named Get DPM Software Image
File to save or run the image. Save the image to the My Documents folder.
• To install the ForceActive utility, click the hyperlink named Browse to "ForceActive" Utililty.
This utility provides a means to recover automatically from a stretched domain failure.
• To obtain the SVSP VSS Provider files, click the hyperlink named Browse to SVSP VSS Provider.
• To obtain the VSM CLI packages for HP-UX, Linux, or Windows, click the hyperlink named
Browse to VSM CLI Packages to open a Windows Explorer window. Right-click a CLI package
and select Save as to copy the package elsewhere. The CD can be used to install the CLI
packages on other client servers.
• To run the SVSP upgrade patch, select Utility to upgrade from SVSP 2.1x. This upgrade is
performed by HP Services.
14 SAN Virtualization Services Platform overview