HP StorageWorks SAN Virtualization Services Platform Administrator Guide (5697-0934, May 2011)

4. If you want to make changes to your installation, click Back until you arrive at the window
where you can make the change. If you are satisfied with your installation choices, click Next
to start the installation.
After the SVSP VSS hardware provider is installed, the Installation Complete window appears.
5. Click Close to exit the installation wizard.
6. Make sure that the SVSP VSS hardware provider is recognized by VSS by opening a DOS
command prompt window (click Start > Run, and type cmd), typing vssadmin list
providers, and pressing Enter.
The information returned by the vssadmin list provider command is similar to the
information shown in Figure 25 (page 70).
Installing and configuring Microsoft VSS with VSM virtual disks 69