HP StorageWorks SAN Virtualization Services Platform Data Path Module user guide (5697-8058, March 2009)

2 Using the command line interface
This chapter describes the use of the HP StorageWorks SAN Virtualization Services Platform Data
Path Module (DPM) command line interface (CLI). You can configure and manage the DPM with these
common command sets that provide the same functions as the DPM GUI.
CLI overview
The DPM provides a command line user interface through serial, telnet, and ssh connections with
serial being the preferred default. All configuration, maintenance, and monitoring of the DPM is
performed through the CLI.
Command quick reference by object
Table 2 shows which commands are available for the major object types.
Table 2 Commands by object type
PageCommandObject type
26Disable eth command
eths
31Enable eth command
40Modify eth command
51Set eth command
58Show eth command
58Show eths command
28Disable port command
ports
33Enable port command
42Modify port command
43Modify ports command
48Reset port command
63Show port command
64Show ports command
23Create user command
users 26Delete user command
30Disable user command
HP StorageWorks SAN Virtualization Services Platform Data Path Module user guide 15