HP StorageWorks SAN Virtualization Services Platform Data Path Module user guide (5697-8058, March 2009)

Create snmp command

Creates an SNMP receiver.

Syntax

create snmp receiver [name]

Keyword values

[name]

Name of the SNMP trap receiver.

See also

“Delete snmp command” on page 25

“Disable snmp command” on page 29

“Enable snmp command” on page 34

“Modify snmp command” on page 44

“Show snmp command” on page 66

Create user command

Creates a new user in the specified group, or views user settings. The groups defined for the DPM

are Administrator and Monitor. When new users are added, they get the same permissions as the

existing admin or kmonitor users, depending on the group specified in the command. When you issue

this command, you must enter a password for the newly created user that is at least eight characters

in length.

Syntax

create user [user name] group [group name]

Keyword values

[user name]

Name of the new user

[group name]

Name of the group to which the user will belong: Administrator or Monitor.

Notes

Only users belonging to the Administrator group can add, delete, and disable/enable users, and the

current user cannot be disabled or deleted.