HP StorageWorks SAN Virtualization Services Platform Data Path Module user guide (5697-8058, March 2009)

Delete user command
Removes the specified user from the list of administrators who can access the DPM.
Syntax
delete user [user name]
Keyword values
[user name]
Name of the user that you are removing from the system.
Notes
Only users belonging to the Administrator group can add, delete, and disable/enable users, and the
current user cannot be disabled or deleted.
See also
“Create user command” on page 23
“Disable user command” on page 30
“Enable user command” on page 35
“Show user command” on page 68
“Show users command” on page 69
Disable eth command
The DPM includes four Ethernet interfaces: MGMT, GE1, GE2, and GE3. This command disables the
specified Ethernet interface so that it cannot send or receive network traffic.
This command is used for tightened security purposes. Once you disable the MGMT Ethernet interface
using this command, you can access the CLI and administer the DPM only from the serial console.
Syntax
disable eth [interface name]
Keyword values
[interface name]
Name of the Ethernet interface that you are disabling: MGMT, GE1, GE2, or GE3.
IPv4 or IPv6
Notes
If you are connected through the management port, disabling the MGMT Ethernet terminates any
active network GUI and CLI sessions, requiring a re-login through the serial console. If you are using
the CLI on the serial console, the connection is not be disrupted.
CLI commands26