HP StorageWorks SAN Virtualization Services Platform Data Path Module user guide (5697-8058, March 2009)
Keyword values
[permission]
Either read, write, or all.
See also
“Disable secure command” on page 29
“Show security command” on page 66
Enable snmp command
Enables the specified Simple Network Management Protocol component. By default, the system runs
SNMP version 2. Enabling SNMP v3 means that SNMP v3 is turned on but does not affect SNMP
v2.
Syntax
enable snmp [component]
Keyword values
[component]
The states of v2, v3, or daemon. Enabling the daemon enables SNMP.
See also
“Create snmp command” on page 23
“Delete snmp command” on page 25
“Disable snmp command” on page 29
“Modify snmp command” on page 44
“Show snmp command” on page 66
Enable ssh command
Enables use of the secure shell (ssh) application to connect to the DPM CLI.
Syntax
enable ssh
See also
“Disable ssh command” on page 29
“Show ssh command” on page 66
CLI commands34