HP StorageWorks SAN Virtualization Services Platform Data Path Module user guide (5697-8058, March 2009)

See also
“Modify factory command” on page 41
“Show factory command” on page 59
Modify chassis command
Allows the user to set values for the DPM's name, location, WWNN, maxframesize, and rank values.
Syntax
modify chassis location [location]
modify chassis maxframesize [maxframesize]
modify chassis name [new-name]
modify chassis rank [new-rank]
modify chassis wwnn [new-wwnn]
Keyword values
[location]
An arbitrary location code provided by the administrator.
[maxframesize]
Maximum size of a Fibre Channel frame that can be sent or received by this DPM. Typically 2 k,
should be set to the smallest frame size of any connected device.
[new-name]
Host name for this DPM.
[new-rank]
Controller rank for this DPM, such as “Primary” or “Secondary.”
[new-wwnn]
The Fibre Channel world wide node name for this DPM.
Examples
modify chassis location “Second floor lab, Main Street office”
modify chassis maxframesize 1024
See also
“Show chassis command” on page 53
Modify date command
Sets the system date and time.
HP StorageWorks SAN Virtualization Services Platform Data Path Module user guide 39