HP StorageWorks SAN Virtualization Services Platform Data Path Module user guide (5697-8058, March 2009)

Syntax
modify date [MM/DD/YYYY hh:mm:ss]
Keyword values
[MM/DD/YYYY hh:mm:ss]
MM/DD/YYYY is the month, day, and year for the system time (year must be 4–digits long). hh:mm:ss
is the hours, minutes, and seconds for the system time.
Notes
Once the time zone is set, the system automatically switches between Standard Time and Daylight
Saving Time.
See also
“Modify timezone command” on page 45
“Show date command” on page 54
Modify eth command
Configures the Ethernet properties—IP address, gateway, and subnet—for the specified Ethernet
interface.
Syntax
modify eth [interface name] [family]
address [IP address] | gateway [gateway address] | netmask [subnet
mask]
Keyword values
At least one of the optional keywords is required:
[interface name]
Ethernet interface that you are modifying: MGMT, GE1, GE2, or GE3.
[family]
IPv4, IPv6
address [IP address]
IP address of the interface.
gateway [gateway address]
IP address of the network gateway.
netmask [subnet mask]
Mask bits for subnet routing.
CLI commands40