HP StorageWorks SAN Virtualization Services Platform Data Path Module user guide (5697-8058, March 2009)
This number specifies the maximum frame size that the DPM can negotiate to exchange with other
Fibre Channel devices. This number must be the same throughout the SAN.
Notes
You must restart the DPM for port capability or port speed changes to take effect.
See also
“Disable port command” on page 28
“Enable port command” on page 33
“Modify port command” on page 42
“Reset port command” on page 48
“Show port command” on page 63
“Show ports command” on page 64
Modify san command
Runs SANAPI. Ctrl-C returns control to the CLI.
Syntax
modify san
Modify snmp command
Changes the SNMP community name.
Syntax
modify snmp community [name]
Keyword values
[name]
The SNMP community string is similar to a user ID or password that allows access to a router's or
other device's statistics. The default is “public,” but any string can be used. It is standard practice for
network managers to change the community string so that outsiders cannot see information about the
internal network.
See also
“Create snmp command” on page 23
“Delete snmp command” on page 25
“Disable snmp command” on page 29
“Enable snmp command” on page 34
“Restart snmp command” on page 49
“Show snmp command” on page 66
CLI commands44