HP StorageWorks SAN Virtualization Services Platform Data Path Module user guide (5697-8058, March 2009)

Comma-separated list of types to be set.
Examples
show debug modules fcpt returns:
fctp=err (newcmd,iocomp,tmf,abts,puntrsp,quefull,rsp,dump)
set debug fcpt level warning sets the fctp module level value to warning.
show debug modules fcpt would now show:
fctp=warning (newcmd,iocomp,tmf,abts,puntrsp,quefull,rsp,dump)
set debug fcpt type tmf,dump level crit sets the types tmf and dump in fcpt to have
debug levels of crit.
show debug modules fcpt would now show:
fctp=warning/tmf,dump=crit (newcmd,iocomp,abts,puntrsp,quefull,rsp)
set debug fcpt level info sets the fsct module level value to info.
show debug modules fcpt would now show:
fctp=info/tmf,dump=crit (newcmd,iocomp,abts,puntrsp,quefull,rsp)
reset debug level fcpt resets the fcpt debug levels to the original values.
show debug modules fcpt would now show:
fctp=err (newcmd,iocomp,abts,puntrsp,quefull,rsp,dump)
See also
“Create debug command” on page 22
“Load debug command” on page 38
“Reset debug command” on page 47
“Save debug command” on page 50
“Show debug command” on page 55
“Watch debug command” on page 71
Set eth command
Changes the Ethernet family address resolution method, duplex, and link speed for the specified
Ethernet interface.
Syntax
set eth [interface name] link [auto | duplex <duplex value> | speed <link
speed>]
or
set eth [interface name] [family] [method]
Keywords and values
Description of keywords:
HP StorageWorks SAN Virtualization Services Platform Data Path Module user guide 51