HP StorageWorks SAN Virtualization Services Platform Data Path Module user guide (5697-8058, March 2009)

Syntax
show date
See also
“Modify date command” on page 39
Show debug command
Returns information that may be helpful to HP support engineers in debugging a problem. There are
currently three different forms of the show debug command. The first form allows you to look at
various types of diagnostic data. The second form (show debug modules) allows you to look at
the current debug settings for kernel modules. The third form (show debug sac) allows you to look
at sac data from the sac fifo.
Syntax
show debug
[agentstate]
[dump]
[fcptstate]
[fcsdb]
.
.
.
[wwpn]
show debug modules [optional-module-name]
show debug sac [sac-command]
Keyword values
At least one of the following keyword values is required:
[agentstate]
Shows diagnostic information related to the fabric agent (the software component that interfaces with
the VSM).
[dump]
Shows cumulative system debug information.
[fcptstate]
Provides the state of the SCSI target driver.
[fcsdb]
Shows information about the Fibre Channel ports and SCSI LUNs visible to the DPM.
[fcsexch]
HP StorageWorks SAN Virtualization Services Platform Data Path Module user guide 55