HP StorageWorks SAN Virtualization Services Platform Data Path Module user guide (5697-8058, March 2009)

Notes
If the fan is a power supply fan, the RPM is not available. The RPM displays as 0 if the fan is not
operational; as 1 if the fan is operational.
See also
“Show fans command” on page 60
Show fans command
Displays the fan location, the status (either OK or Error), and the RPM for all fans in the DPM.
Syntax
show fans
Notes
If the fan is a power supply fan (Fan 1 and Fan 3), the RPM is not available. The RPM displays as 0
if the fan is not operational; as 1 if the fan is operational.
See also
“Show fan command” on page 59
Show ftp command
Indicates whether or not FTP is enabled or disabled.
Syntax
show ftp
See also
“Disable ftp command” on page 27
“Enable ftp command” on page 32
Show group command
Returns the list of user names that belong to the specified group name. The groups defined for the
DPM are Administrator and Monitor.
Syntax
show group [group name]
Keyword values
[group name]
Name of the group to which users belong: Administrator or Monitor.
CLI commands60