HP StorageWorks SAN Virtualization Services Platform Manager Command Line Interface User Guide (5697-0936, May 2011)

6 Error code list
Table 3 (page 64) shows a list of error codes that the Virtualization Services Manager (VSM) CLI
can return and their description. If the CLI returns a 0, the command has run successfully without
an error.
Table 3 VSM CLI error code list
General error
1 – Memory allocation error.
7 – Unexpected program failure.
9 – OS error (like reading input file error)
122 – Log file can not be opened.
Argument parsing error
113 – Bad argument at CLI command.
114 – Input or output file could not be opened.
115 – Command line to long (more that 1024 characters).
Command parsing error
4 – Error reading parameters.
113 – Parameter checking failed.
116 – Unknown command.
Errors during command execution
2 – No VSM found or selected.
3 – Execution Error (VSM failed the command).
5 – Buffer supplied to VSM for the command is too short.
6 – Synchronization timeout on operation.
8 – Operation not supported on current platform or VSM.
10 – Driver couldn't find a View with the required name.
11 – No partition (file system) found on Virtual Volume/View.
12 – Invalid device name.
13 – No object with specified name found.
14 – VSM is not logged into a valid Domain.
15 – Failed to lock CLI (probably not released by another CLI instance)
16 – SCSI error occurred while communicating with VSM.
17 – This CLI version requires a higher VSM version.
18 – No partition number for a dynamic volume.
19 – Connectivity error (similar to 2).
21 – Virtual Volume/View is not assigned to this computer.
22 – Mount point is not free.
23 – Mount point not found.
24 – Fail to rescan devices.
104 – Fail to expand partition.
112 – Not enough pool space.
117 – Disk partition failure.
64 Error code list