HP StorageWorks SAN Virtualization Services Platform Manager command line interface user guide (AG781-96016, March 2009)

NOTE:
This command tries to process all qualified groups (disk groups whose source is in the local domain),
ignoring failures in some groups (if any).
BreakAllRemoteAsyncMirrorTasks command
Syntax
BreakAllRemoteAsyncMirrorTasks -Group AsyncMirrorGroupName, -timeout 900
Description
Breaks (or detaches) all the tasks of a remote asynchronous mirror group (the remote group is deleted).
Using this command is the same as calling the BreakRemoteAsyncMirrorGroup command.
Remote means the source virtual disk is in a remote SVSP domain.
The -Destination of the task is:
L—Local destination: In the local (current) SVSP domain.
R—Remote destination: In a remote SVSP domain.
NOTE:
In this case, the task's destination can only be remote. This command tries to process all qualified
tasks, ignoring failures in some tasks (if any).
BreakLocalAsyncMirrorGroup command
Syntax
BreakLocalAsyncMirrorGroup -Group AsyncMirrorGroupName_1 ~
[-Group AsyncMirrorGroupName_2, . . . , ] ~
-timeout 900
Description
Breaks (or detaches) the local asynchronous mirror groups. All tasks of each group are broken, but
the groups remain active. All tasks of the group are paused before breaking. Local means the source
virtual disk is in the local (current) SVSP domain.
NOTE:
If a failure occurs for any group on the list, the command stops executing and does not process the
remaining list.
Using the VSM command line interface52