HP StorageWorks SAN Virtualization Services Platform Manager command line interface user guide (AG781-96016, March 2009)

ResumeLocalAsyncMirrorTask command
Syntax
ResumeLocalAsyncMirrorTask -Group AsyncMirrorGroupName, ~
-task AsyncMirrorTaskName_1, ~
[-task AsyncMirrorTaskName_2, . . . , ] ~
-timeout 900
Description
Resumes the tasks of a local asynchronous mirror group that were previously paused. Local means
the source virtual disk is in the local (current) SVSP domain.
NOTE:
• If a failure occurs for any task on the list, the command stops executing and does not process the
remaining list.
• When run under HP-UX, and the task has already been resumed, you will receive an error message
that you should ignore.
Synchronous mirror commands
AddSyncMirrorTaskToGroup command
Syntax
AddSyncMirrorTaskToGroup -Group SyncMirrorGroupName, ~
-Domain DestinationVSMDomainName, ~
-VirtualDisk DestinationVirtualDisk, ~
-StoragePool DestPoolName,
[-WaitForSync 0|1 ,] -timeout 900
Description
Adds a synchronous mirror task to the synchronous mirror group.
By default, the CLI returns after the task status is normal, which means that the synchronized operation
was completed (WaitForSync=1). For the CLI to return immediately after task creation, the WaitForSync
argument should be reset (WaitForSync=0).
BreakSyncMirrorTask command
Syntax
BreakSyncMirrorTask -Group SyncMirrorGroupName, ~
-Task Task_1_Name [, -Task Task_2_Name, . . . ]
Description
Breaks synchronous mirror tasks (that is, removes them from their synchronous mirror group).
HP StorageWorks SAN Virtualization Services Platform Manager command line interface user
guide 61