HP StorageWorks SAN Virtualization Services Platform 3.0.2 Virtualization Services Manager Demo Mode User Guide (5697-0346, May 2010)

A How to use DBINIT
Syntax
dbinit _setup_ <add|del> <lun|hba> <name> [parameters]
or
dbinit _setup_ <commands file>
Description of command arguments
This section describes the command arguments and parameters and their options.
_setup_
This is an existing database or a database file to be created. Do not use the .FDB extension within
the dbinit command line.
add, del operation
del—Deletes the object with the given name. Additional parameters do not need to be provided. The
operation should fail if you are trying to delete a configured LUN or a host HBA that has permissions
to any object in the database.
add—Adds an object of the given type to the database. The parameters depend on the type of the
object.
lun, hba
The type of object.
name
The WWN of the LUN or HBA.
parameters
Additional input is needed for the add command, depending on the type of the object.
• Lun—The add or edit options accept the following parameters:
-n <lun #> -v <vendor> -m <model> -c <capacity in gb>
The demo initiator needs to create two default access paths for each LUN through two ports of
the RAID it simulates.
SAN Virtualization Services Platform 3.0.2 Virtualization Services Manager Demo Mode User
Guide 27