HP StorageWorks SAN Virtualization Services Platform administrator guide (5697-0204, January 2010)

For additional backup protection, use an SFTP or an SCP utility to copy the saved configuration
file to an external host.
To restore the backup configuration file, perform these steps:
1. Login to the DPM as kadmin.
2. To upload the saved config file you want use, type this command and press Enter.
load config <file name>
where <file name> is the name of the configuration file that you saved using the save config
command. The configuration file is retrieved from /common/ images/configs.
3. Reboot the DPM.
4. Make sure that the configuration from the backup configuration file is the configuration that you
want to use.
HP StorageWorks SAN Virtualization Services Platform administrator guide 121