HP StorageWorks SAN Virtualization Services Platform Data Path Module user guide (5697-8058, March 2009)
See also
“Enable insecure command” on page 32
“Show security command” on page 66
Disable ntp command
Disables use of the ntp protocol on the DPM.
Syntax
disable ntp
See also
“Enable ntp command” on page 33
“Modify ntp command” on page 41
“Restart ntp command” on page 48
“Show ntp command” on page 63
Disable port command
Disables the specified Fibre Channel port number so that it cannot send and receive Fibre Channel
traffic.
Syntax
disable port
[port number]
*
Keyword values
[port number]
Port number is an integer 0–15 to indicate the DPM Fibre Channel port to be disabled.
* indicates all Fibre Channel ports.
See also
“Enable port command” on page 33
“Modify port command” on page 42
“Modify ports command” on page 43
“Show port command” on page 63
“Show ports command” on page 64
CLI commands28