HP StorageWorks SAN Virtualization Services Platform Data Path Module user guide (5697-8058, March 2009)

Disable secure command
Disables permissions on SSL-encrypted transmissions.
Syntax
disable secure [permission]
Keyword values
[permission]
Either read, write, or all.
See also
“Enable secure command” on page 33
“Show security command” on page 66
Disable snmp command
Disables the specified Simple Network Management Protocol component. By default, the system runs
SNMP version 2. Disabling v3 means that SNMP v3 is turned off, but does not affect SNMP v2.
Syntax
disable snmp [component]
Keyword values
[component]
Either v2, v3, or daemon. Disabling the daemon disables SNMP.
See also
“Create snmp command” on page 23
“Delete snmp command” on page 25
“Enable snmp command” on page 34
“Modify snmp command” on page 44
“Show snmp command” on page 66
Disable ssh command
Disables use of the secure shell (ssh) application to connect to the DPM CLI.
Syntax
disable ssh
HP StorageWorks SAN Virtualization Services Platform Data Path Module user guide 29