HP StorageWorks SAN Virtualization Services Platform Data Path Module user guide (5697-8058, March 2009)
See also
“Disable ntp command” on page 28
“Enable ntp command” on page 33
“Modify ntp command” on page 41
“Show ntp command” on page 63
Restart snmp command
Stops and then restarts the Simple Network Management Protocol.
Syntax
restart snmp
See also
“Create snmp command” on page 23
“Delete snmp command” on page 25
“Disable snmp command” on page 29
“Enable snmp command” on page 34
“Modify snmp command” on page 44
“Show snmp command” on page 66
Restart ssh command
Stops and then restarts the ssh service.
Syntax
restart ssh
See also
“Disable ssh command” on page 29
“Enable ssh command” on page 34
“Show ssh command” on page 66
Save config command
Saves a configuration file.
Syntax
save config [name]
HP StorageWorks SAN Virtualization Services Platform Data Path Module user guide 49