HP StorageWorks SAN Virtualization Services Platform Data Path Module user guide (5697-8058, March 2009)

Syntax
show bootsets
See also
“Enable bootset command” on page 31
“Show bootset command” on page 52
Show chassis command
Returns the name, location, part number, MAC base address, serial number, original manufacture
date, Fibre Channel World Wide Node Name, Fibre Channel maximum frame size, or rank for the
DPM.
Syntax
show chassis
[location]
[MAC_base_address]
[maxframesize]
[name]
[orig_mfg_date]
[part_num]
[rank]
[serial_num]
[wwnn]
Keyword values
At least one of the following keyword values is required:
[location]
An arbitrary location code provided by the administrator.
[MAC_base_address]
Indicates the base address for the Ethernet MAC on the Data Path Module.
[maxframesize]
Maximum size of a Fibre Channel frame that can be sent or received by this DPM. Typically 2 k,
should be set to the smallest frame size of any connected device.
[name]
Host name for this DPM.
[orig_mfg_date]
Indicates the original manufacturing date for this DPM.
[part_num]
HP StorageWorks SAN Virtualization Services Platform Data Path Module user guide 53