HP StorageWorks SAN Virtualization Services Platform administrator guide (5697-0204, January 2010)

c. Select Full and click OK.
d. Repeat these steps for all other VSMs at the second site.
NOTE:
If you are not using HP Continuous Access SVSP, you still have to enter the administrator
user name and password for the second VSM at the local site. The user name must have
administrative privileges for the VSM.
4. Ensure that the check box is selected next to the names of the Local SVSP.
5. Check the box next to the DPMSnap under Local SVSP.
6. Click the + button next to parameters and select full.
7. Click the Add button and enter a description. If you experience a problem with a migration,
snapclone, or asynchronous mirror task, select the There is a problem with a task box, and specify
the task name, source domain, and destination domain. Click OK.
HP StorageWorks SAN Virtualization Services Platform administrator guide 131