HP StorageWorks SAN Virtualization Services Platform administrator guide (5697-0204, January 2010)

A Using VSM with firewalls
To protect you system against unauthorized access from outside your network, enable Windows
Firewall. However, a number of ports need to be opened to allow SVSP to communicate properly.
Windows 2003
To enable Windows Firewall on Windows 2003:
1. Click Start > Control Panel > Windows Firewall.
2. On the General tab, verify that the firewall is On (enabled).
3. Click the Exceptions tab.
4. Select File and Printer Sharing and click the Edit button.
5. Check the box to enable UPD 137. While UPD 137 is highlighted, click the Change scope button.
6. Select Any computer (including those on the Internet) and click OK.
7. Ensure the check box to the left of File and Printer Sharing is selected.
8. Select the Remote Desktop check box.
9. Click Add Port... The Add a Port window appears.
HP StorageWorks SAN Virtualization Services Platform administrator guide 137