HP StorageWorks SAN Virtualization Services Platform administrator guide (5697-0204, January 2010)

Windows 2008
To enable Windows Firewall on Windows 2008 through Server Manager:
1. Open Server Manager.
2. Select Configuration > Windows Firewall With Advanced Security > Windows Firewall Properties.
3. Under each the first three tabs, select Settings > Customize.
4. Under the Firewall settings, ensure that Display a notification is set to Yes.
In addition, the SVSP must be added to the Exceptions tab in the Windows Firewall Settings.
1. Go to Control Panel > Windows Firewall Settings.
2. Click on the Exceptions tab.
3. Select Add program.
4. Add the SVSP Monitor and SaSnap.
Furthermore, use the following procedure to open the same TCP ports listed for the Windows 2003
Firewall settings.
1. Click Start > Control Panel > Windows Firewall.
2. On the General tab, verify that the firewall is On (enabled).
3. Click the Exceptions tab.
4. Select File and Printer Sharing.
5. Select the Remote Desktop check box.
6. Click Add Port... The Add a Port window appears.
HP StorageWorks SAN Virtualization Services Platform administrator guide 139