HP StorageWorks SAN Virtualization Services Platform administrator guide (5697-0204, January 2010)

Figure 3 Management interface
.
The following sections describe steps that need to be performed in creating the initial pool of SVSP
blocks, creating a virtual disk or LUN out of those blocks, and then presenting that virtual disk to a
server.
Common SVSP tasks to get started
These tasks allow you to make new virtual disks available for use.
Creating stripe sets
See the “Working with stripe sets” chapter in the HP StorageWorks SAN Virtualization Services
Platform Manager user guide for detailed information on using stripe sets.
Creating SVSP storage pools
See the “Working with storage pools” chapter in the HP StorageWorks SAN Virtualization Services
Platform Manager user guide for detailed information on viewing and managing storage pools.
Creating SVSP virtual disks
See the “Working with virtual disks ” chapter in the HP StorageWorks SAN Virtualization Services
Platform Manager user guide for detailed information on viewing and managing virtual disks.
Presenting SVSP virtual disks to application servers
See “Presenting SVSP virtual disks to servers” on page 42.
SAN Virtualization Services Platform overview14