HP StorageWorks SAN Virtualization Services Platform administrator guide (5697-0204, January 2010)

Presenting hosts in SVSP
See “Presenting SVSP virtual disks to servers” on page 42.
Installing the VSM CLI
The VSM CLI packages are located on the Virtualization Services Manager CD. To install the CLI onto
a Windows server:
1. If connected, disconnect the Fibre Channel cables from the VSM server.
2. Insert the Virtualization Services Manager CD into the DVD drive. A message asks if you want
active content on your computer.
NOTE:
If autorun does not start when you insert the CD into the drive, right-click the CD in My
Computer, browse to the CD, and then run setup.exe manually.
3. Click Yes. The VSM menu appears.
4. To obtain the VSM CLI packages for Windows, click the hyperlink named Browse to VSM CLI
Packages to open a Windows Explorer window. Right-click a CLI package and select Save as
to copy the package elsewhere. The CD can be used to install the CLI packages on other client
servers.
NOTE:
The VSM CLI installation packages for HPUX and Linux can also be obtained from the CD.
Advanced tasks
The following are tasks that are performed after the completion of the more basic tasks.
Creating synchronous mirrors
See the “Using mirroring” chapter in the HP StorageWorks SAN Virtualization Services Platform
Manager user guide for information on using synchronous mirroring.
Import data from existing array virtual disks to reuse the data
See the “Using migration” chapter in the HP StorageWorks SAN Virtualization Services Platform
Manager user guide for information on copying data from one storage pool to another.
Creating PiTs and snapshots using HP Business Copy SVSP
See the “Using snapshots” chapter in the HP StorageWorks SAN Virtualization Services Platform
Manager user guide for information on creating Point-in-Time (PiT) images and snapshots.
HP StorageWorks SAN Virtualization Services Platform administrator guide 15