HP StorageWorks SAN Virtualization Services Platform Manager command line interface user guide (AG781-96016, March 2009)

Snapclone commands
AddSnapcloneTaskEx command
Syntax
AddSnapcloneTaskEx -SCGroup SnapcloneGroupName, ~
-Task SnapcloneTaskName, ~
-Domain DestinationVSMDomainName, -Priority 1|2|3, ~
-VirtualDisk SourceVirtualDiskName, ~
-Destination DestinationVirtualDisk, -StoragePool PoolName, ~
[-Thin 0|1,] [-host HostName1 RW|OFF,] ~
-timeout 900
Description
Adds snapclone task to a group (extended command).
The Priority argument has no significance, and should be treated as optional.
AddVDGSnapcloneTaskEx command
Syntax
AddVDGSnapcloneTaskEx -SCGroup SCGroupName, ~
-task SnapcloneTaskName, ~
-VDGroup DestinationVDGroupName, ~
-Domain DestinationVSMDomainName, -Priority 1|2|3, ~
[-host HostName1 RW|OFF,] ~
-VirtualDisk SourceVirtualDisk _Destination DestinationVirtualDisk ~
_StoragePool PoolName _thin [0|1], ~
[-VirtualDisk SourceVirtualDisk _Destination DestinationVirtualDisk ~
_StoragePool PoolName _thin [0|1],] ~
-timeout 900
Description
Adds a snapclone task to a group that is built over a virtual disk group. The -VDGroup is used as
the name for the created virtual disk group on the destination.
For any virtual disk included in the source virtual disk group, you need to create a destination virtual
disk and specify a storage pool from which the destination virtual disk is created.
NOTE:
The number of source virtual disks (-VirtualDisk ) must be the same as the number of virtual disks
in the source snapclone group. Keep the same order as the virtual disks appear in the snapclone
group virtual disk list.
The Priority argument has no significance, and should be treated as optional.
Using the VSM command line interface40