Managing HP Serviceguard A.11.20.20 for Linux, May 2013

D.3.5 Configuring a Channel Bonding Interface with Persistent IPv6 Addresses on
SUSE
Configure the following parameters in /etc/sysconfig/network/ifcfg-bond0:
BOOTPROTO=static
BROADCAST=10.0.2.255
IPADDR=10.0.2.10
NETMASK=255.255.0.0
NETWORK=0.0.2.0
REMOTE_IPADDR=""
STARTMODE=onboot
IPADDR1=3ffe::f101:10/64IPADDR2=fec0:0:0:1::10/64
BONDING_MASTER=yes
BONDING_MODULE_OPTS="mode=active-backup miimon=100"
BONDING_SLAVE0=eth1BONDING_SLAVE1=eth2
For each additional IPv6 address, specify an additional parameter with IPADDR<num> in the
configuration file.
Bonding module options are specified in each of the bond device files, so nothing needs to specified
in/etc/modprobe.conf
290 IPv6 Network Support