Managing HP Serviceguard A.11.20.20 for Linux, May 2013

ManualsBrandsHP ManualsSoftwareHP SAP Linux Serviceguard Cluster Extension

100

IMPORTANT: SITE must be 39 characters or less, and

are case-sensitive; each SITE entry must exactly match with

one of the SITE_NAME entries. Duplicate SITE entries are

not allowed.

NETWORK_INTERFACE The name of each LAN that will be used for heartbeats or

for user data on the node identified by the preceding

NODE_NAME. An example is eth0. See also

HEARTBEAT_IP, STATIONARY_IP, and “About Hostname

Address Families: IPv4-Only, IPv6-Only, and Mixed Mode”

(page 88).

NOTE: Any subnet that is configured in this cluster

configuration file as a SUBNET for IP monitoring purposes,

or as a monitored_subnet in a package configuration

file (or SUBNET in a legacy package; see “Package

Configuration Planning ” (page 104)) must be specified in

the cluster configuration file via NETWORK_INTERFACE and

either STATIONARY_IP or HEARTBEAT_IP. Similarly, any

subnet that is used by a package for relocatable addresses

should be configured into the cluster via

NETWORK_INTERFACE and either STATIONARY_IP or

HEARTBEAT_IP. For more information about relocatable

addresses, see “Stationary and Relocatable IP Addresses

and Monitored Subnets” (page 62) and the descriptions of

the package ip_ parameters (page 182).

For information about changing the configuration online,

see “Changing the Cluster Networking Configuration while

the Cluster Is Running” (page 230).

HEARTBEAT_IP IP notation indicating this node's connection to a subnet that

will carry the cluster heartbeat.