Managing HP Serviceguard for Linux, Eighth Edition, March 2008

Configuring Packages and Their Services
Editing the Configuration File
Chapter 6 233
• successor_halt_timeout. Used if other packages depend on this
package; see “About Package Dependencies” on page 123.
• script_log_file. See script_log_file on page 213.
• log_level. See log_level on page 214.
• failover_policy. Enter configured_node or min_package_node.
See page 214 for more information.
(This parameter can be set for failover packages only.)
• failback_policy. Enter automatic or manual. See page 214 for
more information.
(This parameter can be set for failover packages only.)
• If this package will depend on another package or packages, enter
values for dependency_name, dependency_condition,
dependency_location, and optionally priority.
See “About Package Dependencies” on page 123 for more
information.
NOTE The package(s) this package depends on must already be part of the
cluster configuration by the time you validate this package (via
cmcheckconf; see “Verifying and Applying the Package
Configuration” on page 236); otherwise validation will fail.
•Use monitored_subnet to specify a subnet to be monitored for this
package. If there are multiple subnets, repeat the parameter as
many times as needed, on a new line each time.
In a cross-subnet configuration, configure the additional
monitored_subnet_access parameter for each monitored_subnet
as necessary; see “About Cross-Subnet Failover” on page 136 for
more information.
• If your package will use relocatable IP addresses, enter the
ip_subnet and ip_address addresses. ip_subnet must be a subnet
that is already specified in the cluster configuration.
In a cross-subnet configuration, configure the additional
ip_subnet_node parameter for each ip_subnet as necessary; see
“About Cross-Subnet Failover” on page 136 for more information.