Serviceguard Disaster Recovery Products Compatibility and Feature Matrix (Metrocluster with Continuous Access for P9000 and XP) - HPUX and Linux
5
Metrocluster with
Continuous Access for
P9000 and XP Version
HP-UX
Version
SG Version
MCDREnabler
fileset
Version
1
XP/P9000 Platform & Microcode2
Raid Manager
Version
Feature(s)
A.08.00
(September’08)
Documentation for this
product version:
11i v2
A.11.17
and
A.11.18
A.07.00
XP512/48: 01-19-99 or later
XP1024/128: 21-14-33 or later
XP10000: 50-09-34 or later
XP12000: 50-09-34 or later
XP20000: 60-02-04-00 or later
XP24000: 60-02-04-00 or later
3DC configuration: XP10000/XP12000: 50-09-
34 or later.
XP20000/XP24000: 60-02-04-00 or later
01.21.06 or later
6. Support for IPv6 Configurations
7. Metrocluster for RAC,
supports Oracle 10gR2 RAC,
requires Servicegard and SGeRAC A.11.18,
supports SLVM 1.0 (on HP-UX 11i v2 and 11i v3)
and SLVM 2.0 (on HP-UX 11i v3 only) with up to 16 node
clusters (8 nodes per site),
supports CVM/CFS 4.1 (on HP-UX 11i v2) with up to 16 node
clusters (8 nodes per site),
supports CVM/CFS 5.0 (on HP-UX 11i v2 and 11i v3) with up
to 16 node clusters (8 nodes per site)
must be implemented as a Site Aware Disaster Tolerant
Architecture
patches required
14 15
8. Support for Three Data Center Topology added for XP
20000/XP24000
9. Added HP Integrity Virtual Machines (VMs) 4.0 support with VM’s
configured as Serviceguard packages in HP-UX 11i v3 host
environments (late Sept’08)
10. Support for SONET/SDH as heartbeat and Continuous Access links
(Oct’08)
11. Support Thin Provisioning (ThP) Volumes (only 20000 and XP24000)
(Jan’09)
Note: Modular packages introduced with Serviceguard A.11.18 not
supported (only legacy packages supported)
16
11i v3
A.11.17.01
and
A.11.18
A.07.00
(December’07)
Documentation for this
11i v2
A.11.17
and
A.11.18
(without
SLVM or
A.06.00
XP512/48: 01-19-99 or later
XP1024/128: 21-14-33 or later
XP10000: 50-09-34 or later
01.20.06 or later
12. Support for Data Replication Storage Failover Preview
13. Cross-subnet configurations supported - requires Serviceguard
A.11.18 patches
14. Added HP Integrity Virtual Machines (VMs) 3.5 support with
13
Note: On HP-UX 11i v3 , Metrocluster for RAC requires the following patches: PHSS_39047(Serviceguard A.11.18.00), PHSS_37928 (Serviceguard eRAC A.11.18.00). PHSS_38400 (Serviceguard A.11.18.00 for CVM/CFS 5.0 support), ( CVM/CFS
4.1 not supported ) , PHSS_39630 (Metrocluster DREnabler A.08.00).
14
Note: On HP-UX 11i v2, Metrocluster for RAC requires the following patches: PHSS_37601 (Serviceguard A.11.18.00), PHSS_36928 (Serviceguard eRAC A.11.18.00), PHSS_37432 (CFS) , PHSS_39633 (Metrocluster DREnabler A.07.00). For 16
node support when using CFS/CVM the following additional patches are required on HP-UX 11i v2: SG1118_1123 PHSS_38423, and CFS1118_1123 PHSS_38399
15
Note: On HP-UX 11i v3, Metrocluster for RAC requires the following patches: PHSS_37602 (Serviceguard A.11.18.00), PHSS_36929 (Serviceguard eRAC A.11.18.00). PHSS_36690 (Serviceguard A.11.18.00 for CVM/CFS 5.0 support), ( CVM/CFS
4.1 not supported ) , PHSS_39634 (Metrocluster DREnabler A.07.00). For 16 node support when using CFS/CVM the following additional patches are required on HP-UX 11i v3: SG1118_1131 PHSS_38424, and CFS1118_1131 PHSS_38400
16
Note: Site Controller packages of Site Aware Disaster Tolerant Architecture are the only supported modular packages