Serviceguard Disaster Recovery Products Compatibility and Feature Matrix (Metrocluster with Continuous Access for P9000 and XP) - HPUX and Linux

9
Metrocluster with
Continuous Access for
P9000 and XP Version
Software on
Linux Server
SG/LX Version
XP/P9000 Platform &
Microcode17
Raid
Manager
Version
Feature(s)
Not supported features:
1. Site Controller packages
2. Three Data Center Disaster Recovery (3DC DR) solution
3. VxVM and VxFS is not supported
Metrocluster with
Continuous Access for
P9000 and XP Version
Software on
Linux Server
SG/LX Version
XP/P9000 Platform &
Microcode19
Raid
Manager
Version
Feature(s)
B.01.00.10
(May 2013)
RH5:SGLX_00372
RH6:SGLX_00373
SLES11:SGLX_00374
Documentation for this
product version:
www.hp.com/go/
linux-
serviceguard-docs
RHEL 5.7
RHEL 5.8
RHEL 5.9
RHEL 5.10
RHEL 6.1
RHEL 6.2
RHEL 6.3
RHEL 6.4
RHEL 6.5
SLES11 SP1
SLES11 SP2
SLES11 SP3
A.11.20.20
XP20000/XP24000:
•60-04-04-00/10 or
later
P9500:
• 70-01-04-00/00 or
later
01.22.06
or later for
all XP arrays
01.24.13
or later for
P9500
arrays
20
Supported features in this version:
1. Continuous Access Synchronous replication
2. Continuous Access Journal replication
3. Continuous Access Asynchronous replication only with XP
arrays
4. Serviceguard package failover policies site_preferred and
site_preferred_manual
5. LVM
6. Persistent Reservations (PR)
7. Device Mapper multipathing
8. VMWare virtual machines as Metrocluster nodes
9. Device Group Monitor
10. Data Replication Storage Failover Preview (cmdrprev
command)
11. Remote Command Device
12. Persistent Reservations support with device mapper
multipathing
13. Cluster verification
14. Virtual Command Device
19
Note: This table represents what has been certified and is supported. If other storage, microcode or Raid Manager versions are available but not indicated in this table, it is currently not supported by Metrocluster with Continuous Access for
P9000 and XP. The table will be updated when new versions are certified.
20
The following features introduced in HP Storage P9000 RAID Manager are not supported with Metrocluster: Virtual Command Device via LAN, Copy Group configuration based on RAID, User Authentication based on Command Device. The User
Authentication for the Command Device Security must be disabled in a Metrocluster environment.