HP Smart Update Manager 6.0.1 Release Notes (Ed. 3)

HP SUM does not display the Force button for components to be updated on nodes running Red Hat
Enterprise Linux 5.10
Suggested Action: Manually reinstall the RPM outside of HP SUM. This issue will be fixed in a future
version of HP SUM.
HP SUM Actions menu stops working after deploying components
Suggested Action: Click the Refresh button on your web browser.
HP SUM cannot configure some components
Suggested Action: Configure the component outside of HP SUM, if HP SUM cannot configure a
component.
HP SUM 6.x does not configure Insight Management SNMP Agent components
Suggested Action: HP SUM applies the default configuration settings for the component. Review and
update the Insight Management SNMP Agents after HP SUM finishes installing the component.
HP SUM displays “Update returned an error” when deploying 32-bit Linux components to 64-bit Linux
nodes
Suggested Action: Install the 32-bit versions of the dependency libraries. For more information, see
“Prerequisites” (page 4).
HP SUM displays an error on a ProLiant DL580 Gen8 server
Suggested Action: For information on this issue, see the Customer Advisory at http://
h20564.www2.hp.com/portal/site/hpsc/public/kb/docDisplay/?docId=emr_na-c04127124.
HP SUM does not list hard drive components or update VMware hard drives
Suggested Action: No action necessary. This will be fixed in a future version.
HP SUM does not properly detect Windows 2012 R2 components
Suggested Action: Run the smart component individually if HP SUM does not apply an update as
expected. This will be fixed in a future release of HP SUM.
HP SUM on Windows 2012 systems displays two versions of some Windows 2012 components
Suggested Action: When running on Windows 2012, if HP SUM displays two versions of a component,
HP SUM is displaying the Windows 2012 and Windows 2012 R2 components. Click Available
Version and read the information to determine which version of the component to apply.
CLI issues
The /use_web legacy CLI command does not work
Suggested Action: Use the GUI mode to download baselines from hp.com. Once HP SUM downloads
the baseline, you can use CLI mode to perform updates using the downloaded baseline.
HP SUM does not deploy multiple components in legacy CLI mode when listed separately in one
command
Suggested Action: Copy the components into a directory and use the /use_location command. If
you are deploying more than ten components, use this suggested action.
HP SUM does not respond when you update an iPDU node in legacy CLI mode
Suggested Action: Update iPDU nodes in GUI mode. This is a known issue that will be resolved in a
future version of HP SUM.
22 Issues and suggested actions