Environment File Variables for Serviceguard Integration with Continuous Access XP
Appendix A422
Continuous Access link present between DC2 and
DC3 but a phantom device group must be present
between DC2 and DC3.
DC1_NODE_LIST
Comma separated list of all node names that are in
data center one (DC1). The node list should begin and
end with quotation marks. For example,
DC1_NODE_LIST=”node1, node2”.
This parameter is not required to be set for a package
configured for two data centers.
DC2_NODE_LIST
Comma separated list of all node names that are in
data center two (DC2). The node list should begin and
end with quotation marks. For example,
DC2_NODE_LIST=”node3, node4”.
This parameter is not required to be set for a package
configured for two data centers.
DC3_NODE_LIST
Comma separated list of all node names that are in
data center three (DC3). The node list should begin and
end with quotation marks. For example,
DC3_NODE_LIST=”node5, node6”.
This parameter is not required to be set for a package
configured for two data centers.
DC1_DC2_DEVICE_GROUP
The Raid Manager device group between DC1 and DC2
for this package. This device group is defined in the
/etc/horcm<#>.conf file.
This parameter is not required to be set for a package
configured for two data centers.
DC2_DC3_DEVICE_GROUP