Designing Disaster Tolerant High Availability Clusters, 10th Edition, March 2003 (B7660-90013)

Environment File Variables for MetroCluster/CA
Appendix A 411
MON_NOTIFICATION_EMAIL ( (Default=empty string)
This parameter defines the email addresses that the
monitor will use to send email notifications. The
variable must use fully qualified email addresses. If
multiple email addresses are defined, the comma must
be used as a separator. If the parameter is not defined
(commented out) or the default value is an empty
string, this will indicate to the monitor that no email
notifications will be sent.
MON_NOTIFICATION_SYSLOG ( (Default=0)
his parameter defines whether the monitor will send
notifications to the syslog file. When the parameter is
set to 0, the monitor will NOT send notifications to the
syslog file. When the parameter is set to 1, the monitor
will send notifications to the syslog file. If the
parameter is not defined (commented out), the default
value is 0.
MON_NOTIFICATION_CONSOLE ( (Default=0)
This parameter defines whether the monitor will send
console notifications. When the parameter is set to 0,
the monitor will NOT send console notifications. When
the parameter is set to 1, the monitor will send console
notifications. If the parameter is not defined
(commented out), the default value is 0.
AUTO_RESYNC This parameter defines the pre-defined
resynchronization actions that the monitor can perform
when the package is on the PVOL side and the monitor
detects the CA data replication link is down. If the
variable is not defined or commented, the default value
of 0 is used.
Values:
0— (DEFAULT) When the parameter is set to 0, the
monitor will not perform any resynchronization
actions.
1—When the parameter is set to 1 and the data
replication link is down, the monitor will split the
remote BC (if configured) and try to resynchronize the
device. Until the resynchronization starts, the monitor