HP Enterprise Cluster Master Toolkit User Guide (5900-2131, December 2011)

MONITOR_PROCESSES[3]=ora_smon_${SID_NAME}
MONITOR_PROCESSES[4]=ora_lgwr_${SID_NAME}
MONITOR_PROCESSES[5]=ora_reco_${SID_NAME}
MONITOR_PROCESSES[6]=ora_rbal_${SID_NAME}
MONITOR_PROCESSES[7]=ora_asmb_${SID_NAME}
MAINTENANCE_FLAG=yes
MONITOR_INTERVAL=30
TIME_OUT=30
KILL_ASM_FOREGROUNDS=yes
PARENT_ENVIRONMENT=yes
CLEANUP_BEFORE_STARTUP=no
USER_SHUTDOWN_MODE=abort
OC_TKIT_DIR=/etc/cmcluster/crs # This attribute is needed only when this toolkit is used in
an SGeRAC cluster.
Generate the database package configuration file and the control script in the database
package directory. Then edit the parameters of these files as mentioned for the database
package.
# cmmakepkg -p db1pkg.conf
# cmmakepkg -s db1pkg.cntl
Edit the package configuration file db1pkg.conf as shown below:
PACKAGE_NAME - Set to any name desired.
PACKAGE_TYPE - Set to FAILOVER.
RUN_SCRIPT /etc/cmcluster/db1_package/db1pkg.cntl
HALT_SCRIPT /etc/cmcluster/db1_package/db1pkg.cntl
DEPENDENCY_NAME asm_dependency
DEPENDENDY_CONDITION <ASM MNP PACKAGE_NAME>=up
DEPENDENCY_LOCATION same_node
If SGeRAC packages are configured in the same cluster, then the ASM MNP package should
not be created and the Oracle database package should depend on the SGeRAC Clusterware
package instead of the ASM MNP. In this case, use the definition below instead of the one
above this paragraph:
DEPENDENCY_NAME asm_dependency
DEPENDENDY_CONDITION <SGeRAC OC MNP PACKAGE_NAME>=up
DEPENDENCY_LOCATION same_node
Configure the service parameters:
SERVICE_NAME ORACLE_DB1_SRV
SERVICE_FAIL_FAST_ENABLED no
SERVICE_HALT_TIMEOUT 300
If listener is configured and needs to be monitored, configure another set of service parameters:
SERVICE_NAME ORACLE_LSNR_SRV
SERVICE_FAIL_FAST_ENABLED no
SERVICE_HALT_TIMEOUT 300
Edit the package control script db1pkg.cntl as shown below:
Since LVM logical volumes are used in disk groups, Set VGCHANGE to "vgchange -a e" and
specify the name(s) of the volume groups in VG[0], VG[1].
Configure the package service:
SERVICE_NAME[0]="ORACLE_DB1_SRV"
SERVICE_CMD[0]="/etc/cmcluster/db1_package/toolkit.sh monitor"
SERVICE_RESTART[0]="-r 2"
ASM Package Configuration Example 43